Filter
Top Products
Rev0.10
73
Section 2
Search for the Music’s Start and End (Scrub/Preview)
Scrub function
When editing a sound, some times you need to know
exactly where the sound starts, or exactly where the
recording with an auto punch in starts.
To enable you to find these points accurately, the BR-600 is
equipped with the Scrub function.
When you use the Scrub function during playback (called
“scrubbing”), the portion from your before or after the
current position (approximately 45 msec) is played back
and repeated.
Preview function
With the Preview function, you can playback the one-
second portion of the song before or after your current
position.
By using this together with the Scrub function, at the same
time slowly moving your current position in the song, it
becomes easy to find the exact transition point from one
phrase to the next.
fig.02-020
1
Hold down [STOP] and press [PLAY].
The [PLAY] begins flashing and scrubbing starts.
The “ ” (SCRUB FROM) and “ ” (SCRUB TO)
displayed at the TEMPO position in the screen are the
scrub points with respect to the current position.
When the cursor is set under the scrub point, it is
possible to change scrub point by TIME/VALUE dial.
fig.02-030
2
Slowly turn the TIME/VALUE dial to move the
current position and search for the starting point of
the phrase (e.g., where sound is first emitted).
3
After you find the exact point where the music starts,
press [STOP] to stop scrubbing.
SCRUB
TO
Time
Now Time
PREVIEW
TO
PREVIEW
FROM
Sound Data
SCRUB
FROM
Approx. 45 msec
Approx. 1.0 msec Approx. 1.0 msec
Scrubbing to Find the Music
Starting/Ending Point
• You can press [PLAY] to preview the material to
or from the currently selected scrub point.
PREVIEW FROM
PREVIEW TO
• To mute the sound of a particular track, hold
down [DELETE/MUTE] and press the relevant
REC TRACK button so it starts blinking.
• You can now press [LOCATOR] to register a
locator point so that you can find the point easily
later.
BR600_e2 73 ページ ２００６年４月１７日 月曜日 午前９時３分