Filter
Top Products
92
Rev0.10
Using the Insert Effects
The BR-600 comes with five effects processors: an insert
effects, loop effects, Track EQ, Pitch Correction, and
Mastering Tool Kit.
An insert effects, loop effects, and Track EQ can be used
simultaneously, and you can make settings for each effect as
desired.
Here is an explanation of how to change the various parameters
for the insert effects and how to then save those changes.
“Insert Effect Parameter Functions” (p. 96)
“Loop Effect Parameter Functions” (p. 120)
“Track EQ Parameter Functions” (p. 122)
The effects used by insert effects and the parameters of each
effect are changed by calling up “effect patches.”
Your BR-600 comes equipped with a number of preset effect
patches for use with vocals and instruments. These are
grouped according to different input sources and each
group is called a “bank.”
fig.03-010
(*1) When either MIC1 or MIC2 is used, the MIC bank is
selected. With both are connected, or neither of them is
connected and the onboard stereo mic switched on, the
LINE Bank is selected.
Your BR-600 allows you to automatically change banks.
For example, pressing the [GUITAR] INPUT SELECT
button changes you to a guitar bank patch, and pressing
[LINE] changes you to a line bank patch.
Also, within each bank, effect patches are further grouped
as shown below.
Preset patches (P)
The preset patches contain preset data. Their settings can be
changed, but you cannot create a new preset patch.
User patches (U)
User patches can be rewritten, and are stored in internal
memory. If you have created a patch that you would like to
use for other songs as well, it is convenient to store it as a
user patch.
Song patches (S)
Like user patches, song patches can be written; however,
the data for song patches are stored along with the song
data to the memory card.
This is convenient when you have created a patch for a
specific recorded performance, and would like to store that
patch together with the song.
fig.03-020
Effect Patches and Banks
Insert effects are applied during recording, in addition
they are applied during the mixing of the various tracks
as well.
For more details, refer to “Changing the destination
Insert Effects are Connected” (p. 95).
Guitar Bank
GTR
GUITAR MIC LINE SIMUL
U01
.
.
U99
User
Patch
Preset
Patch
P01
.
.
P99
Song
Patch
Mic Bank
MIC
INPUT SELECT
U01
.
.
U40
P01
.
.
P40
Line Bank
LIN
U01
.
.
U50
P01
.
.
P50
Simul Bank
SML
U01
.
.
U50
S01
.
.
S99
S01
.
.
S40
S01
.
.
S50
S01
.
.
S50
P01
.
.
P50
Memory Card
BR-600
User
Patch
Song
Song
Patch
Preset
Patch
Song patches (S) cannot be selected unless a memory
card is inserted.
Your BR-600 is shipped with the user patches (U) and
song patches (S) containing the same patches as the
preset patches (P).
BR600_e2 92 ページ ２００６年４月１７日 月曜日 午前９時３分