Filter
Top Products
194
Rev0.10
Mixing the Output from an External Audio Device
with the Output from Your BR-600 (Audio Sub Mix)
The Audio Sub Mix function allows you to mix the signal
input from LINE IN with the signal output to LINE OUT.
Using “Audio Sub Mix,” you can mix sounds from an
external audio device with the output of the BR-600–all
within the BR-600, with no external mixer needed.
fig.06-130
fig.06-140
Enable use of Audio Sub Mix with the following procedure.
1
Confirm that [PAD] is not lit, then press [UTILITY].
2
Press CURSOR [ ] [ ] to move the cursor to
“SYS,” and press [ENTER].
fig.06-150
3
Press CURSOR [ ] [ ] to select “Sub Mixer,” and
turn the TIME/VALUE dial to turn the setting “ON.”
fig.06-160
OFF :
Audio Sub Mix is not used
ON :
Audio Sub Mix is used
4
Press [UTILITY] (or press [EXIT] repeatedly) to return
to the Play screen.
External Mixer
Sounds from LINE IN are mixed
directly in LINE OUT
If INPUT SELECT [LINE] are lit, even when the Sub
Mixer is turned on, the Audio Sub Mix will not work.
BR600_e2 194ページ ２００６年４月１７日 月曜日 午前９時３分