Filter
Top Products
10
Panel Descriptions
fig.0-01
1 VOLUME Knob
The VOLUME knob adjusts the signal volume output
from the MIX OUT jack. The center mark provides an
easy reference setting when connecting the GR-33 to an
instrument amp or mixer.
* The output level from the GUITAR OUT jack is controlled
separately.
2 PLAY Button
This button selects Play mode.
To play sounds, press this button to enter Play mode.
(The GR-33 is in Play mode at start-up.)
3 SYSTEM Button
This button selects System mode.
Press this button to enter System mode. When you are
in System mode, you can make settings to the GR-33
itself, as opposed to making settings for specific
sounds.
4 TUNER Button
This button selects Tuner mode.
When you press this button, the Tuner function will be
turned on, and you can tune your instrument.
5 WRITE Button
Use this button to write a patch (Patch Write).
This button also confirms the Factory Reset and Bulk
Dump operations.
6 COMMON Button
Press this button to access Patch Edit mode’s
COMMON settings—COMMON settings apply to an
entire patch, as opposed to the settings that apply to its
individual tones or effects.
Press this button to enter Patch Edit mode and adjust
settings such as the patch name and patch pedal
functions.
7 TONE Button
Press this button to access Patch Edit mode’s TONE
settings—TONE settings shape the sound of the
individual tones that make up a patch.
8 EFFECTS Button
Press this button to access Patch Edit mode’s EFFECTS
settings—these settings allow you to adjust the patch’s
reverb, chorus, and multi-effect.
9 STRING SELECT Button
When selecting and activating the tones to be played in
a patch (LAYER), and when setting transposition
(TRANSPOSE) and other individual-string settings, use
this knob to select the string you wish to set up.
10 OUTPUT SELECT Button
This button selects the output device connected to MIX
OUT jacks.
1
13 14
11
12
1615
2 3 4 5
6 7 8 9
10