Filter
Top Products
11
Panel Descriptions
11 BANK/PARAMETER Button
Press these buttons in Play mode to switch patch banks.
In System mode and Patch Edit mode, these buttons
select the parameter to be adjusted.
12 PATCH/VALUE Dial
In Play mode, turn this dial to scroll through the
different patches or tones in order.
In System mode and Patch Edit mode, use this knob to
adjust parameter values.
13 Three-digit Display
In Play mode, the three-digit display shows the
currently selected patch’s number.
In System mode, Patch Edit mode, and Pedal Effect
mode, this display shows “SYS,” “Edt,” or “PdL,”
respectively, to indicate the current mode. For
parameters that can be set independently for each
string, the display indicates the currently selected
string’s number.
14 Display
In Play mode, the main display shows the currently
selected patch’s name and the current Harmonist/
Arpeggiator status.
In other modes, the display shows the value and status
of the currently selected item, or “parameter.” Various
messages also appear on this display.
15 Foot Pedal
These are four foot-operated switches. In Play mode,
together with the GK-2A’s “S1,” they primarily switch
patches. After pressing the GK-2A’s “S2” to go into
Pedal Effect mode, you can step on a switch to activate
performance effects such as wah, pitch glide, and hold.
16 Expression Pedal
Use this pedal to control a variety of things, including
the volume, tone and pitch of the current synth sound,
and the arpeggiator tempo.
●
When you operate the expression pedal, please be
careful not to get your fingers pinched between
the movable part and the panel.
In households with small children, an adult
should provide supervision until the child is
capable of following all the rules essential for the
safe operation of the unit.