Filter
Top Products
63
Chapter 6 Using the Built-in Effects
Chap.
6
18: MOD-DELAY (Modulation Delay)
Modulation-delay is an effect which adds modulation to the
delay sound. It produces a flanger-like effect.
fig.6-22
FB MODE (Feedback mode) Normal/Cross
Specify the input destination to which the delay sound will
be returned.
Normal:
The left delay sound will be returned to the left input,
and the right delay sound to the right input.
Cross:
The left delay sound will be returned to the right input,
and the right delay sound to the left input.
DELAY LEFT (Delay time left) 0.0–500 ms
Specify the delay time from the original sound until the left
delay sound is heard.
DELAY RIGHT (Delay time right) 0.0–500 ms
Specify the delay time from the original sound until the right
delay sound is heard.
FEEDBACK (Feedback level) -98–+98 %
Specify the proportion (%) of the delay sound that is to be
returned to the input.
Positive (+) settings will return the sound to the input with
the original phase, while negative (-) settings produce an
inverted phase.
HF DAMP
200/250/315/400/500/630/800/1000/1250/1600/2000/2500/3150/
4000/5000/6300/8000 (200–8000 Hz), Bypass
Specify the frequency at which the high frequency range of
the delay sound returned to the input will be cut.
If you do not want the sound to be cut, select Bypass.
RATE 0.05–10.0 Hz #
Specify the modulation frequency of the modulation effect.
DEPTH 0–127
Specify the modulation depth of the modulation effect.
PHASE 0–180
Specify the spaciousness of the modulation sound.
LOW GAIN -15–+15 dB
Specify the gain (amount of boost or cut) of the low
frequency range.
Positive (+) settings will emphasize (boost) the low
frequency range.
HIGH GAIN -15–+15 dB
Specify the gain (amount of boost or cut) of the high
frequency range.
Positive (+) settings will emphasize (boost) the high
frequency range.
BALANCE (Effect balance) D100:0E–D0:100E
Specify the volume balance between the original sound and
the modulation-delay sound.
With a setting of D100:0E only the original sound will be
output, and with a setting of D0:100E only the modulation-
delay sound will be output.
LEVEL (Output level) 0–127
Specify the output volume.
19: 3-TAP-DELAY (Triple Tap Delay)
Triple-tap-delay is an effect that produces delays in three
directions: center, left and right. The delay time can also be
specified as a note length relative to a specific tempo.
fig.6-23
DELAY LEFT (Delay time left) 200–1000 ms
Specify the delay time from the original sound until the left
delay sound is heard.
DELAY RIGHT (Delay time right)
Specify the delay time from the original sound until the right
delay sound is heard.
* The setting values are the same as for DELAY LEFT.
R in R out
L in L out
Feedback
Feedback
Balance E
Balance D
Balance E
Balance D
2-Band
EQ
2-Band
EQ
Modulation
Modulation
Delay
Delay
R in R out
L in L out
Feedback
Feedback
Balance E
Balance D
Balance E
Balance D
2-Band
EQ
2-Band
EQ
Delay
Delay
Modulation
Modulation
When Feedback Mode parameter is Normal:
When Feedback Mode parameter is Cross:
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance E
Balance D
Balance E
Balance D
Feedback
Center Tap