Speco Technologies CS8 DVR User Manual


 
Operation Instruction
28
Highlight the Schedule Mode box and press the button. You can select between Simple
Mode and Advanced Mode. Selecting Advanced Mode allows you to set up individual recording
schedule for each event.
Highlight the + and press the
button to add a schedule item.
Highlight the box under the Day heading and press the button to change the days that the scheduled
recording will take place. Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
Highlight the box under the Range heading and press the button to change the time range that
the scheduled recording will take place. The smallest time segment you can use is 15 minutes.
Highlight the box under the Mode heading and press the button to change the recording mode
that will be used. Choose from: No Record, Time, Event and Time & Event. (Simple Mode
Only)
When the DVR is in the No Record mode, it will not record during the preset day and time range
as long as
(Panic) in the Live Monitoring menu is not selected. Use the No Record mode when
you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode, the icon displays at the top-left corner of the screen.
The DVR will record and displays the
icon at the top-left corner of the screen during the
scheduled times.
When the DVR is in the Event mode, the red icon displays at the top-left corner of the screen.
The DVR will record and displays the
icon at the top-left corner of the screen when any event
occurs. When the DVR is in the Pre-Event recoding mode, the yellow
icon displays when
there is no event, and the DVR is not recording. When the DVR is in the Pre-Event mode, the
red
and display when any event occurs and the DVR starts recoding.
When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the
icon displays. The DVR follows the Event settings and the
icon displays.
Highlight the box under the Channels heading and press the button to select which cameras
will be recorded. (Simple Mode Only)
Figure 24 Schedule – Settings (Advanced Mode)
setup screen.
Highlight the box under the Settings heading
and press the
button to define the recording
settings. You can set the ips and Quality (ips,
Quality and Dwell for Advanced Mode setup)
of the recording for any modes you set up in the
Mode column. If you do not set the ips, Quality
and Dwell in the Settings column, the DVR
will follow the default settings. See below for
details.
NOTE: Descriptions of the Record icons in
the Type column are as follows:
Time-lapse (Time) Alarm-In
Motion Video Loss
Video Blind Text-In