Filter
Top Products
Operation Instruction
70
Highlight the box beside To and press the button to toggle between On and Off. When set to
Off, you can enter a specific Date and Time. When set to On, the search will be to the last recorded
image.
Highlight the box beside Check Time Overlap and press the button. It toggles between On
and Off. You will only be able to turn the Check Time Overlap on or off if a user-defined date
and time is set to From and To. If the DVR’s date and time have been reset, it is possible for the
DVR to have more than one overlapping start and stop time. When set to On, you will be asked
to select one of the overlapping start and stop time. When set to Off, the DVR will display search
results from all start times to all stop times.
Highlight the box beside Alarm-In and press the button. You can select the alarm inputs that
you want to include in your search.
Highlight the box beside Motion and press the button. You can select the cameras for which
you want any reports of motion detection.
Highlight the box beside Video Loss and press the button. You can select the cameras for which
you want any reports of lost video.
Highlight the box beside Video Blind and press the button. You can select the cameras for which
you want any reports of blind video.
Highlight the box beside Text-In and press the button. You can select the text-in devices which
you want any report of text input.
Highlight the box beside Record Channels and press the button. You can select the cameras
that you want to search for any reports of event recorded data. The DVR will display the events
(not the camera channels) that occurred and that also are recorded on the camera channel that you
selected. If you do not select a camera channel in this field, the DVR will search events that are
not associated with cameras.
You can also toggle On and Off self-diagnostic events as part of your search. The choices are:
Panic Record
Check Recording
Check Alarm-In
Disk Almost Full
Disk Bad
Disk Temperature
Disk S.M.A.R.T.
Disk Config Change
Once you set your desired search conditions, highlight Search and press the button to display
the search results in the Event Log Search screen. Selecting Cancel exits the screen without
saving the changes.