Speco Technologies CS8 DVR User Manual


 
4- & 8-Channel Digital Video Recorder
49
Highlight the box beside Port and press the button. Use the arrow buttons to enter the SMTP
Server port number obtained from your system administrator. The default port number is 25.
Highlight Enable SSL/TLS and press the button to toggle between On and Off. When it is
On, the DVR can send an email via an SMTP server requiring SSL (Secure Sockets Layer)
authentication.
NOTE: This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/).
Highlight the box beside Sender and enter the sender’s e-mail address. Use the virtual keyboard
to enter the e-mail address.
NOTE: The e-mail address must include the “@” character to be a valid address.
Highlight the Test box and press the button to test emailing with the current settings you made.
Highlight the SNS tab, and the SNS setup screen displays.
To add an SNS account, highlight the + and press the button.
Highlight beside Type and press the
button. Selecting Twitter
from the Type allows you to post a tweet on Twitter when an event
occurs.
Highlight the box beside User Name/Password and press the button. A virtual keyboard
appears allowing you to enter the user name and password.
The SNS accounts can be deleted by highlighting the beside the account and pressing the
button.
NOTE: Posting a tweet might fail because of Twitter limitations.
Highlight the box beside Authentication and press the button. An
Authentication screen appears.
Highlight Use and press the button to toggle between On and Off.
Highlight the box beside User/Password and press the
button.
A virtual keyboard appears allowing you to enter the user ID and
password.
Figure 52 Notification SNS setup screen.
The DVR can be set up to post a message via
SNS (Social Network Service) when an event
occurs. You can add and edit the SNS (Social
Network Service) account on this screen. The
SNS account can be turned On or Off by
highlighting the boxes under the No. heading
and pressing the
button.