Speco Technologies CS8 DVR User Manual


 
Operation Instruction
52
Audio
Highlight Audio in the Devices menu and press the button. The Audio setup screen appears.
Alarm-Out
Highlight Alarm-Out in the Devices menu and press the button. The Alarm-Out screen allows
you to change the settings and establish a schedule for the alarm output from the DVR.
Highlight the Schedule tab, and the Alarm-Out Schedule setup screen displays.
Configure the port’s setting based on the PTZ camera manufacturer’s
instructions.
Figure 57 Audio setup screen.
The DVR can record up to four audio inputs.
Highlight the box beside the input and press the
button. A list of cameras appears, and you
can select which camera you want associated
with that audio input.
Highlight Enable Audio-Out and press the
button. This toggles between enabling and
disabling audio out.
NOTE: The DVR will NOT record audio
when the recording speed is set to less
than 1 ips.
Figure 58
Alarm-Out Settings setup screen.
The alarm output can be given its title by
highlighting the box under the Title heading and
pressing the
button. A virtual keyboard
appears allowing you to enter the title.
Highlighting the box beside Dwell Time and
pressing the
button allows you to set the dwell
time of the alarm output. Dwell times range from
5 seconds to 15 minutes.