Filter
Top Products
4- & 8-Channel Digital Video Recorder
71
Record Table Search
NOTE: The recorded data in the time range located after the yellow vertical line is the latest.
There are three view modes. Standard view, Expanded view and Compact view. Standard view
(default) displays combined recording information of all camera channels currently displayed on
the screen. In the Standard view mode, selecting the
icon located at the bottom switches to the
Expanded view mode. The Expanded view displays the recording information of each camera
channel currently displayed on the screen. Selecting the
icon in the Standard view mode
switches to the Compact view mode which displays only the toolbar. Selecting the
icon in the
Compact view mode switches to the Standard view mode, and selecting the
icon in the Expanded
view mode switches to the Standard view mode.
Selecting
or
located at the bottom zooms the record table. Selecting
displays eight hours
(1-minute based), and selecting
displays 24 hours (3-minute based) at once. To move to earlier
or later times that are not shown in the current record table screen, select the arrows located at the
end of the times by using the arrow buttons on the front panel.
NOTE: If the DVR has images recorded in more than one recording mode in the same time
range, the recording status bar displays recording information in the following priority order:
Panic Pre-Event Event Time. The color of the bar indicates different recording
modes: Red for Panic, Yellow for Pre-Event, Purple for Event, and Blue for Time.
Selecting
located at the bottom displays the Calendar Search screen.
< Compact View >
< Standard View >
< Expanded View >
Figure 70 ─ Record Table Search screen.
Recording information about video images
currently displayed on the screen displays on
the recording status bar. A grey vertical line
indicates the current search position. To search
specific video, move the vertical line by using
the Left or Right arrow buttons on the front
panel or by clicking the mouse on the desired
segment.
If the DVR’s time and date have been reset to
a time that is earlier than some recorded video,
it is possible for the DVR to have more than
one video stream in the same time range. In
this case, the overlapping time range in the
record table will be separated by a yellow
vertical line.
Days with recorded video display on the calendar with white
numbers. You can highlight the days with recorded video by
using the arrow buttons. Once you have highlighted a day,
press the
(Play/Pause) button to select it. The first recorded
image of the selected date will pause on the screen. Once
you have selected the date you want to search, review the
surrounding video by using the playback controls located at
the bottom of the Record Table Search screen.