Filter
Top Products
4- & 8-Channel Digital Video Recorder
31
Highlight the desired box under the Alarm-Out heading, and press the button. Select between
Alarm Output and Beep (DVR’s internal buzzer) that you would like to activate and to sound
whenever the DVR detects an input on the associated alarm input.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to
the Event mode in the Alarm-Out setup screen (Schedule tab).
Highlight the desired box under the Notify heading, and press the button. The Alarm-In Notify
menu appears.
Figure 28 ─ Alarm-In Actions 1 setup screen.
You can set the actions the DVR will take
whenever it senses an input on one of its alarm
input connectors.
Highlight the desired box under the Record
heading, and press the
button. A list of
cameras appears. Select the cameras that you
want the DVR to record whenever it detects
an input on the associated alarm input.
NOTE: For the Record action, the camera
you select should be set to the Event or
Time & Event recording mode in the Record
Schedule setup screen.
You can toggle the entire list On and Off by highlighting Notification
and pressing the
button. You can toggle the individual items On
and Off by highlighting that item and pressing the
button. Highlight
OK and press the
button to accept your changes.
NOTE: For the Notify action, the notify item you select should
be enabled in the Notification setup screen and the DVR should
be registered in the Speco Central (Remote Administration
System).
Figure 29 ─ Alarm-In Actions 2 setup screen.
Highlight the desired box under the PTZ
heading, and press the
button. A list of PTZ
presets appear. Select the preset position for
each PTZ camera, where you want PTZ cameras
to move to whenever the DVR detects an input
on the associated alarm input.
Highlight the desired box under the Digital
Deterrent heading, and press the
button to
toggle between On and Off. When set to On,
the DVR will sound whenever it detects an input
on the associated alarm input.