Filter
Top Products
Operation Instruction
30
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings
and follows the time settings.
Event Setup
Figure 26 ─ Event menu.
Alarm-In
Highlight Alarm-In in the Event menu and press the button. The Alarm-In setup screen appears.
You can set up the DVR to start panic recording whenever it senses an input on one of its alarm
input connectors. Highlight the box beside Panic Record and press the
button. A list of Alarm
Inputs appears, and you can select which alarm input you want associated with panic recording.
The DVR will continue panic recording until an input on the selected alarm input is released as
long as
(Panic) in the Live Monitoring menu is not selected to stop the panic recording.
Highlight the Actions 1 and Actions 2 tabs, and the Actions 1 and Actions 2 setup screens appear.
Figure 27 ─ Alarm-In Settings setup screen.
The alarm terminal strip on the back of the DVR
has inputs associated with each alarm. You can
set up each input on the Alarm-In screen. You
can turn each input On or Off by highlighting
the alarm number and pressing the
button.
Each input can be given a title. Highlight the
desired Title box and press the
button. A
virtual keyboard appears allowing you to enter
a title name.
Each input can be set as NO (normally open) or
NC (normally closed).