Filter
Top Products
Installation
14 309301G
Installation
• FIG. 5 is not an actual system design. Contact your Graco distributor for assistance in
designing your system.
• See detailed installation instructions, beginning on page 18.
• Be sure all accessories are adequately sized and pressure rated to meet the system
requirements.
• Be sure mounted surfaces and fasteners can support the weight of the equipment; hose,
tubing and cable attachments; and fluid.
Key for F
IG. 5
1 ProDispense Controller with EasyKey™ Pad
2 Remote Operator Station
3 Oil/Lubricant Fluid Panel (244599)
4 Water/Antifreeze Fluid Panel (244600)
5 Grease/Paint Fluid Panel (244601)
6 Fluid Supply Pump
7 Fluid Supply
8 Air Supply Line
9 Dispense Valve
10 Ground Wire to true earth ground
11 Fluid Supply Line
12 Fluid Dispense Line
13 Fluid Shutoff Valve
14 Bleed-type Air Shutoff Valve
15 Optional Printer
Do not install or service this equipment unless you are trained and qualified.
Do not install the ProDispense controller, fluid panels, or remote operator station in a
hazardous location.