Filter
Top Products
Conventions
309301G 5
Conventions
The following conventions are used in this manual to help guide you through the information.
• Italicized text in a screen diagram indicates the text may vary according to how the sys-
tem parameters have been configured. For example, the units of measure shown in the
manual may be qts (quarts). The units you see on your screen may be pounds, kilograms,
quarts, gallons, or liters.
• A shaded box is used to indicate a value/field that can be edited on the controller
screen.
• A circled number in a screen diagram relates a field on the screen to a step in a proce-
dure.
• Numbers and letters in parentheses in the text, such as (A) or (7), refer to reference num-
bers and letters in the figures.
• When you need to press a key during a procedure, the key is indicated by an icon as
shown in the following example: Press Start to begin the dispense.
Warning Symbols
The warning symbol alerts you to the possibility of serious injury or death if you do not follow
the instructions.
Symbols, such as fire, explosion, or electric shock hazard (shown at left), alert you to the spe-
cific hazard. Read the main Warnings on pages 6-7 for detailed information about the hazard
indicated.
Caution Symbol
The caution symbol alerts you to the possibility of equipment or property damage or to opera-
tion errors if you do not follow the instructions.
Note Symbol
The note symbol is used to call your attention to additional helpful information.
Amount 20 qts
Recipe#
1
ID#
1. Enter the ID
number.
1