Filter
Top Products
Service
38 309301G
To install controller:
6. Secure controller (B) to the mounting surface with four bolts (B1).
7. Plug two connectors (A2, A3) into the display board. See F
IG. 14.
8. Install controller cover (A) and secure it with four screws (A1).
9. Reconnect ground wire (G) and power (P), meter (F), and solenoid (E) cables to the con-
troller. See F
IG. 13.
FIG. 14
TI1436a
A2
A1
A3
B
B1
A