Filter
Top Products
Installation
309301G 21
Connect a Printer (optional)
Connect the 5 ft. (1.52 m) printer cable (provided with printer kit 239873) between the printer
and controller printer connector marked . See F
IG. 5, page 15.
Connect to a PC or Alarm (optional)
The ProDispense system can be connected to a PC via Modbus RTU network protocol (6)
and/or audible alarms (7) as shown in F
IG. 12. Refer to field wiring chart, page 60. Follow
instructions on page 26 to setup modbus station number and recipe selection. Contact your
Graco distributor for Modbus address mapping list.
Accessory Printer Cable 198669, 50 ft. (15.24 m) long, is available. Do not use longer cables.
FIG. 12
TI1454A
4
5
5
1
1
4
2
2
3
3
6
7