Filter
Top Products
WARNING
309301G 7
WARNI NG
HIGH PRESSURE FLUID HAZARD/SKIN INJECTION HAZARD
Fluid Panels 244599 and 244601 can be operated at very high fluid pressure (see page 4). High pres-
sure spray from dispense valves, hoses, or ruptured components can inject fluid into your body and
cause an extremely serious injury, including the need for amputation. Splashing fluid in the eyes or on
the skin can also cause a serious injury.
The following precautions should be taken for high pressure fluid dispensing:
• Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgi-
cal treatment.
• Do not place a rag over the end of the nozzle and “blow back” fluid to clear the nozzle.
• Follow the additional precautions under LOW PRESSURE FLUID HAZARD.
LOW PRESSURE FLUID HAZARD
Fluid Panel 244600 is for low pressure use only (see page 4). Fluid coming from the dispense valves,
leaks or ruptured components can splash in the eyes or on the skin and cause serious injury.
The following precautions should be taken for either high or low pressure fluid dispensing:
• Wear protective eyewear.
• Do not put your hand or fingers over the valve nozzle or hose.
• Do not point the dispense valve or hose at anyone or at any part of the body.
• Do not stop or deflect leaks with your hand, body, glove or rag.
• Follow the Pressure Relief Procedure on page 24 before cleaning, checking, or servicing the
equipment or installing or cleaning the dispense valve nozzle.
• Tighten all fluid connections before operating the equipment.
• Check the hoses, tubes, and couplings daily. Replace worn, damaged, or loose parts immediately.