Filter
Top Products
Fusion IV DVR User Guide
________________________________________________________________________________________________________
Document 800-05305V1 Rev B 103
10/11
PTZ Status on Close
The PTZ Status on Close option defines the default settings for a PTZ camera when the
controller is not open. This includes activating a tour, moving to a preset position or
leaving the camera as it.
Stay Put
Leaves the PTZ in its present state.
Start Tour
Starts the Pre-Defined Tour function when the PTZ controller is closed.
Go To Preset
Moves to a Selected Preset position when the PTZ controller is closed.
Activating the PTZ Status on Close Option
1. Start by creating a Preset or Tour for the selected camera. See the instructions
above.
2. Select either Start Tour or Go To Preset.
3. Click Apply to save.
PTZ Tour Scheduling
The PTZ Tour Scheduling option allows users to create set tour schedules for PTZ
cameras connected to the DVR. The Tour Schedule allows users to schedule tours on
specific days of the week and specific hours of the day for multiple PTZ cameras.
Selected time frames are designated in blue and non-selected (default frames) and
shown in white.
Create PTZ Tour Schedule
1. Click Setup on the Live View screen.
2. Click PTZ.
3. Select the desired PTZ camera channel from the Channel list.
4. Click Tour Schedule to open the PTZ Tour Schedule window.
5. Click and drag the mouse cursor to select blocks of time (hours 0-24) on the
desired days of the week, and then click Select.
Days of the
week
Hours 0-23
(24 hours)