Filter
Top Products
Setup Options
________________________________________________________________________________________________________
80
SMART Alert
1. Set up the General and Users
tabs first. (see previous sections)
2. Select the Enable SMART
Alarm check box.
3. Define the number hours
between SMART checks.
4. Select the type of SMART event
to trigger an action.
5. Define the maximum HDD
temperature.
6. Select an action method.
7. Click Apply.
Alarm Event
1. Set up the General and Users
tabs first. (see previous sections)
2. Select the Use Email Alarm
check box.
3. Define the number of minutes
between recording data checks.
4. Select Motion and/or Sensor to
send and alert on that type of
event.
5. Click Apply.
6. Click Close to return to the
Administration tab.
Data Management
Data Management is available for select regions where operators must delete data after
a set number of days. If you need to purge your video data, and this feature is not
enabled on your Fusion recorder, contact Technical Support.