Filter
Top Products
Fusion IV DVR User Guide
________________________________________________________________________________________________________
Document 800-05305V1 Rev B 55
10/11
Frame Setup
The Frame Setup menu allows configuration of the IPS, resolution, quality, and
sensitivity of camera channels. When configuring the IPS sliders the BLUE slider
represents the IPS the DVR will record during intensive recording and have available for
transmitting to remotely connected systems. The RED slider represents the IPS that will
be recorded by the DVR under normal recording conditions.
The total IPS of all blue sliders may not exceed the recording IPS of the DVR. The IPS of
a red slider may not exceed that of the blue slider for the same channel. The dual sliders
allow configuration of the DVR to record at a lower IPS while still being able to transmit
at a higher IPS to remote connections.
Ex. If a camera channel is set to 25 IPS (blue) and 7 IPS (red), the DVR will record at 7
IPS and users viewing live video remotely can receive up to 25 IPS.
Note The RED IPS record slider cannot exceed the BLUE IPS capture slider.
Note The Software will not allow the maximum available Frames to be exceeded.
Frame Select
Blue Slider: Sets the IPS recorded during intensive recording and available for viewing
on a remote client PC.
Red Slider: Sets the IPS recorded by the DVR during normal recording.
Resolution: Affects the total number of frames per second that are available.
Codec: Select the appropriate codec for each camera (MJPEG, MPEG-4, H.264)
Video Quality: Lower quality video has a smaller file size but appears more pixilated.
Sensitivity: Sets the Keyframe refresh rate. Adjusting this setting can have negative
effects on video quality.
Note Do not change the default setting unless instructed by a system administrator.