Filter
Top Products
Fusion IV DVR User Guide
________________________________________________________________________________________________________
Document 800-05305V1 Rev B 65
10/11
Steps 1-8: Schedule cameras 1 and 2 to be activated on Sensor # 3 and/or
Sensor #5 which will then activate Relay Output #7 and #13.
1. Select Sch01 from the Schedule Number list. (This should already be selected by
default.)
2. Click the Single Selection Mode button.
3. Select the SUN, MON, TUE, WED, THU, FRI, and SAT check boxes.
4. On the Sch01 line (time selector grid), highlight the hours 00-23 and click Set.
5. Click Camera buttons #1 and #2 until the Red Sensor buttons are selected.
6. Click Sensor buttons #3 and #5.
7. Click Relay buttons #7 and #13.
8. Click Apply to save.
Step 4
Step 5
Step 1
Step 2
Step 3
Step 6
Step 7