Filter
Top Products
Fusion IV DVR User Guide
________________________________________________________________________________________________________
Document 800-05305V1 Rev B 125
10/11
Fusion Remote Software Overview
The DVR was specifically designed to be fully operated and maintained remotely. It
connects using the standard TCP/IP protocol thorough connection types such as DSL,
Cable Modem, T1, ISDN, 56K Modem, LAN, and more. The Fusion Remote software
provides for viewing live video, searching through archived video, exporting images and
video clips; and provides virtually full Setup control.
Highlights:
• Search Archived Video
• View Live Video
• Export Images and Video Clips
• Control Relay Outputs
• Setup Administration
Basics:
The DVR can have up to five simultaneous remote connections. Each user can perform
functions on the DVR and will not affect the other users. The only exception to this is
accessing Setup. Only one user is allowed to access setup at any given time. The
Frames per Second passed to the Remote Client varies greatly depending on the
connection type and speed.
In order to log in to the DVR server, a user account must be made for the user. This
ensures that only authorized personnel are allowed to log in. In addition, each user can
be assigned different privileges that allow or deny them access to different functions.
(See the User Management section.) For example, a user can be denied Searching and
Setup privileges and only granted access to view cameras 4, 8 and 16.
Attention It is highly recommended that users not be granted Setup privileges since
this can pose a security risk. Only authorized Administrators should have
access to Setup.
The Remote software operates virtually the same way as the DVR itself. Its appearance
matches the DVR almost identically, however, there are a few minor differences. Some
search features are not available as well as some Setup options.