Filter
Top Products
Fusion IV DVR User Guide
________________________________________________________________________________________________________
Document 800-05305V1 Rev B 69
10/11
Sensor Setup
The Sensor setup window allows you to enable, disable and configure Sensors and
Relays (Control Outputs).
Configure Sensor Response
1. Click Setup on the Live View screen.
2. Click the Sensor tab.
3. Click to select NO or NC (Normally Open or Normally Closed) for the desired
sensor.
4. Enter the Delay time to define the number of seconds after the sensor is tripped
until the relay is activated.
Tip Associate sensors and relays with cameras when creating a recording
schedule.
5. Click Apply.
Enter Custom
Sensor/Control Names
Configure Hybrid
(IP) Sensors
Associate Sensor w/ PTZ Presets
Open the On-Screen Keyboard