Filter
Top Products
Fusion IV DVR User Guide
________________________________________________________________________________________________________
Document 800-05305V1 Rev B 53
10/11
Connecting to a Wide Screen Display
1. Click Exit on the Live View screen and select Exit in Windows Mode.
2. Right-click the Desktop and select Screen Resolution.
3. From the Resolution list, select the proper resolution of the connected display.
Tip Refer to the display documentation for the proper resolution settings.
4. Click OK and confirm the change.
5. Double-click the Fusion Server icon on the Desktop.
6. Click Setup on the Live View screen and then click General.
7. Under Display Settings, select the Use Full Screen check box and then select the
correct resolution from the Display Size list.
8. Click Apply.
Connecting a Second Monitor
1. Click Exit on the Live View screen and select Exit in Windows Mode.
2. Right-click the Desktop and select Screen Resolution.
3. Click the secondary Live View screen and from the Multiple displays list click
Extend these displays.
4. Click Apply.
5. On the Resolution list, select the proper resolution of the connected display.
Tip Refer to the display documentation for the proper resolution settings.
6. Click OK and confirm the change.
7. Double-click the Fusion Server icon on the Desktop.
8. Click Setup on the Live View screen and then click General.
9. Under Function, select the Dual Monitor check box.
10. Click Apply.