Filter
Top Products
Included Software Setup
________________________________________________________________________________________________________
130
Configuring the Server for Remote Connection
1. Enter Setup on the DVR.
2. Click the Network tab.
3. Clear the Disable Remote Control check box.
Note If you are using a Firewall, it may be necessary to adjust the port settings on
both the DVR and the Firewall. Contact the Network Administrator for more
information.
4. Click OK.
5. Make sure a User account is created. Without a user account, the Administrator
account must be used.
6. The DVR server is now ready to receive incoming connections.
Connecting to a DVR
Refer to the Setup section of the FVMS Manual for information on using the FVMS
Software. The FVMS Manual can be found on the Fusion Software CD.