Filter
Top Products
ENGLISH
7
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning
Setting the motion detection
• Select the camera number.
See “■ SELECTION CAMERA NUMBER” on page 38.
• Set the detection areas.
See “■ DETECTION MASK SETTING” on page 38.
• Set the sensitivity.
See “■ SENSITIVITY” on page 39.
• Set the minimum number of dots for starting the motion detecting operation.
See “■ MOTION THRESHOLD” on page 39.
• Set the restriction of motion detection function.
See “■ MD LOCK OUT TIME” on page 40.
Setting the timer recording
• Select the normal & alarm recording or pre-alarm recording.
See “■ Recording mode settings A to D for normal recording and alarm recording” on page 46.
• Set the recording mode.
• Select the camera selection during the alarm recording.
See “■ Recording mode settings for normal recording and alarm recording” on pages 41 to 43.
• Set the interval/picture grade for normal recording and alarm recording.
See “■ Setting the recording interval and recording picture quality for normal recording” on pages
25 and 26.
• Set the duration of alarm recording.
See “■ ALARM REC DURATION” on page 46.
• Set the duration of pre-alarm recording.
See “♦ PRE ALARM REC” on page 43, and “■ Pre-alarm recording time table” on pages 77 and 78.
• Set the timer program mode.
See “<TIMER PROGRAM SETTINGS>” on pages 44 to 46.
• Set the holiday.
See “■ HOLIDAY SETTING” on page 46.
• Set the timer program.
See “♦ Structure of the <TIMER PROGRAM> screen” on pages 44 and 45.
• Selecting the day.
• Selecting the start time.
• Selecting the end time.
• Selecting the recording mode.
• Selecting the motion detection mode.
Timer recording is executed/completed
See “■ Warnings and their appropriate countermeasures” on page 81.
Searching the recorded data
• Set the device to be searched.
See “♦ PLAYBACK DEVICE” on page 63.
• Select the camera number to be searched.
See “♦ SELECTION CAMERA NUMBER” on page 63.
• Select the search mode.
See “♦ SEARCH TYPE” on page 63.
• Set the alarm list search.
See “■ ALARM LIST SEARCH” on page 66.
• Set the time and date for alarm list search.
See “♦ DATE/TIME” on page 63.
The search is completed/The search result is displayed
Playback the search result
• Select the camera number to be played back.
See “<MPX DISPLAY SETTINGS>” on pages 36 and 37.
• Select the sequence screen.
See “♦ SPLIT/SINGLE, +, and – button” on page 36.
• Playback
See “■ Basic playback” on page 26.
• Select the speed of playback.
See “■ Various playback functions” on page 62.