Filter
Top Products
118
En
05
Use Other Equipment With Your Flat Panel TV
5.10 HMG Setup
Use the HMG Setup option for Network Setup, Auto Connection Setup and Default Settings. For more information
about each option, refer to the following sections.
Network Setup
Select whether to acquire the IP Address automatically or manually or, when acquiring manually, set the IP
Address and Subnet mask. To access the Network Setup menu, follow the steps below.
Automatic:
To perform the procedure, DHCP on your server or router must be valid.
1 ) Press HMG.
The Home Media Gallery menu appears on screen.
2 ) Select
HMG Setup
from the menu.
Use the arrow buttons to highlight an option then press
ENTER
.
3 ) Select
Network Setup
.
4 ) Select
Auto DHCP
.
5 ) Select
Yes
.
The flat panel TV seeks and acquires an IP Address if available.
6 ) Press EXIT or HMG to exit Home Media Gallery.
Manual:
Before activating, check your media server for IP Address and Subnet mask information.
1 ) Access the
Network Setup
through the
HMG Setup
.
2 ) Select
Auto DHCP.
3 ) Select
No
.
4 ) Select the appropriate box.
Use
or
to highlight an entry item (IP Address or Subnet mask) then press
ENTER
.
No need to enter Default Gateway and DNS Server data.
5 ) Enter the figures using buttons 0 to 9.
Subnet mask (such as 255.255.255.0): Enter the same figures.
IP Address (such as 192.168.201.***): Enter the same figures as used in the media server (PC, etc.). For
***, enter 3-digit figures (0 – 254) that have not been used for other network connections.
Use
or
to highlight other entry areas.
6 ) Press ENTER on the appropriate box after the entry is complete.
Repeat Steps 4 to 5 to complete Network setup.
7 ) Press EXIT or HMG to exit Home Media Gallery.
Network Setup
Default Settings
Auto Connection On
PRO151FD.book Page 118 Wednesday, April 2, 2008 10:19 AM