Filter
Top Products
38
En
03
Basic Operations For Television Viewing
3.2.4 Set the Clock
Set the flat panel TV’s clock to take advantage of many built-in features such as Time Zone and D.S.T. (Daylight
Saving Time) activation for digital TV broadcast.
Note: If the panel’s power cord is unplugged or there is a power outage, the time must be reset.
Follow the steps below to set the clock.
1 ) Access the
System Setup
through the
Setup
.
2 ) Select
Digital Tuner Setup
from the System Setup menu.
3 ) Select
Clock
from the Digital Tuner Setup menu.
4 ) Select
Time Zone
from the options.
5 ) Select the time zone for your area.
6 ) Select the menu option
D.S.T.
to activate/deactivate Daylight Saving Time.
7 ) Select the proper option for your location.
8 ) Press HOME MENU to close the menu and exit.
3.2.5 Create the List of Channels
This section describes how to search for and set up TV channels. There are two ways to add channels to your flat
panel TV, Auto Installation for automatic channel selection or manual channel assignments. The Auto Installation
adds all available channels from your selected TV provider. Once all channels are added to the list, simply delete
any unwanted channels. This section provides steps to add/remove channels.
Auto Installation
Auto Installation searches for and adds TV channels to your list of viewable channels. Using the remote control,
follow the steps below to automatically select all available channels.
1 ) Access the
System Setup
through the
Setup
.
2 ) Select
Auto Installation
from the System Setup menu.
3 ) Select
Air/Cable, Language
, or
Time Zone
from the Auto Installation menu.
4 ) Select an option.
• Signal type: Air or Cable
• Language: English, Français or Español
•Time Zone: Atlantic, Eastern, Central, Mountain, Pacific, Alaska, or Hawaii
Time Zone : Atlantic
D.S.T. : On
PRO151FD.book Page 38 Wednesday, April 2, 2008 10:19 AM