Filter
Top Products
78
En
05
Use Other Equipment With Your Flat Panel TV
5 Use Other Equipment With Your Flat Panel
TV
Although earlier sections have mentioned other equipment for playing back video, this section provides control
and operation information for specific types of equipment.
5.1 Program the Remote Control to Operate Other Equipment
To operate other equipment or devices through your flat panel TV, program the panel’s remote control with the
equipment’s Learning function or manufacturing code. A manufacturing code is a series of numbers that identify
the type of device and the brand. These codes are available in the section entitled “8.2 Manufacturer Codes to
Program into the Remote Control” in Appendix 8.2 of this manual.
5.1.1 Use the Learning Feature
The Learning function allows the panel’s remote control to memorize other remote controls’ codes.
To activate the Learning function follow the directions below.
1 ) Press SELECT to choose the device to learn.
2 ) Press EDIT/LEARN and 2 at the same time.
The selected mode indicator flashes when the remote control is
ready to be learned.
3 ) Use the number buttons to learn a manufacturing code.
The mode indicator lights up.
The Learn session is canceled in 30 seconds and the indicator
restarts blinking again. When the indicator flashes, the selected
device’s remote is memorized. To exit the Learn mode before it
finishes, press
EDIT/LEARN.
4 ) Press EDIT/LEARN again to exit the Lean mode.–
Note: The Learn session is canceled:
– if no operation is performed for more than one minute after
having pressed
EDIT/LEARN
and
2
(the mode indicator is
flashing)
– if you press
SELECT
– Code transmission finishes in approximately two seconds. Do not interrupt it until the transmission is
complete. Wait until the mode indicator flashes again. When using any of the receiver buttons (
,
INPUT
,
or
VOL+/–
), the learned manufacturer code remains the same.
VOL
CH
1
123
456
789
0
CH
ENTER
CH RETURN
EXIT
TOOLS
SAT GUIDE
DVD
TOP MENU
SAT / DVD MENU
HDMI
CTRL
SOURCE
INPUT
TV
RCV VCRSAT
CBL
DVR
DVD
STOP
VOL
SELECT
EDIT/LEARN
REC
HMG
HOME
MENU
RETURN
MUTING
TV
2
INPUT
TV/DTV
DISPLAY
FREEZE
SCREEN
SIZE
AV
SELECTION
34
5
PC
SPLIT
SWAP
SHIFT
67
ENTER
RECEIVER
2 cm to 5 cm (0.8 inches to 2.0 inches)
Remote control
(Supplied accessory)
Remote control of
AV product
1 2 3
456
789
INPUT
TV
RCV VCRSAT
CBL
DVR
DVD
VOL
SELECT
RECEIVER
EDIT/LEARN
PRO151FD.book Page 78 Wednesday, April 2, 2008 10:19 AM