Filter
Top Products
19
En
02
Install Your Flat Panel TV
Attach/Detach the Speaker
The flat panel TV’s speaker delivers high-quality, clear sound. Although other devices can be added or removed
from the mounted panel, physically attach the speaker last. Disconnect the cables from the Speaker and
REMOVE THE SPEAKER before mounting or moving the panel.
Before attaching the speaker to your mounted panel, review the information below.
• Lay the panel face down on a stable surface when attaching speaker brackets.
• Use only the supplied screws and tighten securely before stepping away.
• Handle the speaker carefully to protect the cabinet and grille net from scratches and other damage.
• Placing a CRT monitor near the speaker can cause a blur on the flat panel TV. Keep the distance between the
speaker and the monitor.
Note: Use the foam packing materials to protect the equipment from scratches or other damage during
mounting.
Stand-Mounted Panel
1 ) Attach the appropriate speaker brackets (left and right) to the top and bottom on the back of the speakers
using the supplied screws.
• Connecting these speakers to another panel or device can
damage the unit or cause a fire.
• When using tone control to increase treble, avoid over-
amplifying the volume.
Speaker bracket
(For BOTTOM-Right)
Speaker bracket (For TOP-Right)
Screw holes
Speaker bracket
(For TOP-Right)
Place the speaker so its
terminals (bottom) are
facing you.
Speaker bracket
(For BOTTOM-Right)
Screw holes
(PRO-151FD)
PRO151FD.book Page 19 Wednesday, April 2, 2008 10:19 AM