Filter
Top Products
80
En
05
Use Other Equipment With Your Flat Panel TV
5.1.4 Clear Added Manufacturer Codes from the Remote Control
To return all learned and preset codes to the defaults (PIONEER), follow the steps below.
To exit before the reset is complete, press the EDIT button again. The reset is cancelled if no action is taken within
60 seconds. Also, switching the Mode during this procedure cancels the reset.
5.1.5 Control a Pioneer Receiver
The flat panel TV’s remote control has a bank of buttons specifically for controlling a Pioneer receiver. The active
buttons, left to right, are as follows:
1 ) Press EDIT and TV at the same time.
Selection can be in any mode.
2 ) Press the Yellow button.
Confirm that the selected mode indicator flashes.
The remote control enters the Manufacturing Reset mode. The
reset is complete when the mode indicator flashes on for one
second. The remote control then returns to normal operation.
Note: The panel’s remote control may not control or have complete
control of some equipment listed in the tables.
• RECEIVER STANDBY/ON
(turns the Pioneer Receiver On/Off)
• RECEIVER INPUT
(cycles through/selects an input)
• RECEIVER VOL –
(adjusts the volume lower)
• RECEIVER VOL +
(adjusts the volume higher)
1
TV
2
INPUT
TV/DTV
DISPLAY
SCREEN
SIZE
AV
SELECTION
34
5
PC
67
SAT / DVD MENU
HDMI
CTRL
SOURCE
INPUT
EDIT/LEARN
STOP
VOL
SELECT
REC
HMG
HOME
MENU
RETURN
RECEIVER
TV
RCV VCRSAT
CBL
DVR
DVD
HDMI
CTRL
SOURCE
INPUT
TV
RCV VCRSAT
CBL
DVR
DVD
STOP
VOL
SELECT
REC
HMG
RECEIVER
EDIT/LEARN
PRO151FD.book Page 80 Wednesday, April 2, 2008 10:19 AM