Filter
Top Products
100
9-4 Items in the Extended Setup Menu
Chapter 9 Setup Menus
953 UP CONVERTER
PROCESS SELECT
(HDW-D1800 only. Invalid
in 24PsF or 23.98PsF
mode)
Select the original picture to use when converting SD to HD.
FIELD: Use field picture.
FRAME: Use frame picture.
adapt (standard mode): Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
adap2 (still playback priority mode): Set a higher ratio of converting from frames
when up-converting.
adap3 (motion priority mode): Set a higher ratio of converting from fields when
up-converting.
954 DETAIL GAIN (UC) (HDW-
D1800 only. Invalid in
24PsF or 23.98PsF mode)
Adjust the upconverter image enhancer. Adjust the sharpness of edge
enhancement.
0 to 40H
to 7FH
955 LIMITER (UC) (HDW-
D1800 only. Invalid in
24PsF or 23.98PsF mode)
Adjust the upconverter image enhancer.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H
to 3FH
956 CRISP THRESHOLD (UC)
(HDW-D1800 only. Invalid
in 24PsF or 23.98PsF
mode)
Adjust the upconverter image enhancer. Set the threshold amplitude at which low
amplitude signals are not emphasized.
0 to 8
to FH
957 LEVEL DEPEND
THRESHOLD (UC)
(HDW-D1800 only. Invalid
in 24PsF or 23.98PsF
mode)
Adjust the upconverter image enhancer. Set the luminance range for edge
enhancement.
0 to 8 to FH
958 H DETAIL FREQUENCY
(UC) (HDW-D1800 only.
Invalid in 24PsF or
23.98PsF mode)
Adjust the upconverter image enhancer. Set the center frequency and frequency
characteristic for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz
: 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
959 H/V RATIO (UC) (HDW-
D1800 only. Invalid in
24PsF or 23.98PsF mode)
Adjust the upconverter image enhancer. Set the horizontal/vertical ratio for edge
enhancement.
0 to 3 to 7
960 GAMMA LEVEL (UC)
(HDW-D1800 only. Invalid
in 24PsF or 23.98PsF
mode)
Adjust the upconverter image enhancer. Adjust the slope of the correction curve.
0 to 80H
to 100H
961 BACKGROUND COLOR
(UC) (HDW-D1800 only.
Invalid in 24PsF or
23.98PsF mode)
Set the color of the part where no material exists (background) for up-converting.
BACKGROUND COLOR: Set the color.
BLACK
: Black
GRAY: Gray
BLUE: Blue
TABLE: Set with the following Y/P
B/PR tables.
Y TABLE: Adjust the background Y level.
0
to FFH
B-Y TABLE: Adjust the background B-Y level.
0 to 80
to FFH
R-Y TABLE: Adjust the background R-Y level.
0 to 80
to FFH
Menu items in the range 900 to 999, relating to digital processing (Continued)
Item number Item name Settings