Filter
Top Products
15
2-1 Control Panels
Chapter 2 Location and Function of Parts
• Edit state indication
The following indications appear when edit preset is
activated.
“ASM”: Assemble editing is preset.
“INS”: Insert editing is preset.
“ ” (blank): Neither of the above is preset.
• CONFI/PREREAD indication
The CONFI or PREREAD mode and operating state are
indicated as shown below.
“CONFI”: The unit is in CONFI mode, but not currently
executing CONFI playback.
“CONFI ON”: The unit is in CONFI mode and currently
executing CONFI playback.
“PREREAD”: The unit is in PREREAD (audio and
video) mode.
“A-PREREAD”: The unit is in PREREAD (audio only)
mode.
“V-PREREAD”: The unit is in PREREAD (video only)
mode.
“ ” (blank): None of the above apply.
• Capstan lock indication
The capstan lock mode is indicated as 2F, 4F or 8F (in 50i
mode or 25PsF mode).
• Video input signal
The currently selected video input signal type is indicated
as SDI or HDV.
The video input signal indicator flashes when there is no
input signal selected (for example, when there is no input).
2 Function menu information
The function menu displays information regarding the
function buttons on the left and right sides of the LCD.
For details on the function menu, see page 63.
• Name of function menu page
This displays the name of the current function menu page.
• Function button display area
A total of 10 function buttons are displayed for each
function menu page: five each on the left and right sides of
the LCD.
Function button name: This is the name of the function
button.
Function button settings: This is the setting of the
function button.
3 Audio level meter block 1
• Digital audio track/input channel number
This displays the digital audio track number and input
channel number (1 to 4, CUE or 5 to 8).
• Audio input selection
The name of the signal selected for each input channel is
indicated under the digital audio input channel number.
“SDI1”: HDSDI CH1
“SDI2”: HDSDI CH2
“SDI3”: HDSDI CH3
“SDI4”: HDSDI CH4
“AES1”: AES/EBU CH1
“AES2”: AES/EBU CH2
“AES3”: AES/EBU CH3
“AES4”: AES/EBU CH4
“ANA1”: ANALOG CH1
“ANA2”: ANALOG CH2
“SG”: Internal audio test signal (when F6 (AUDIO SG) is
set to “ON” in function menu page P08: AUD INP)
“HDV”: HDV
a)
(when an option is installed)
a) The digital audio input channel numbers are all selected at one time.
The audio input selection is not displayed when the audio
levels of track 5 to 8 are being indicated during MPEG
IMX tape playback on this unit.
• Monitor selection
Whether or not tracks are currently selected for monitoring
is indicated on the left and right sides of the digital audio
track/input channel number 1 indication. When
MONITOR CH1 (L) is selected, “L” is indicated. When
MONITOR CH2 (R) is selected, “R” is indicated.
Note
12 34
:
47 12
::
59.94 SDI 2F ASM
LTC
10801080
DF LTC EXT-LTC R-RUN
PROLL
HOME
VIDEO IN
SDI
EDIT
E.PRESET
CLR CNT
HOME
PB/EE
PB
CONFI
ENABLE
COUNTER
CTL
MENU
TCG SET
L R
1
SDI1
3+4
BANK3
REM:20min
HD
COND
VITC
L R
2
ANA2
2
-60
-40
-30
-20
-10
0
dB
L R
3
SDI3
1
L R
4
AES4
4
-60
-40
-30
-20
-10
0
dB
L R
CUE
3+4
-40
-20
-10
-20
10
dB
EMPH DATA EMPH DATA
CONFI
PARARUN
Name of function menu page
Function button display area
Note
L R
1
SDI1
L R
2
ANA2
L R
3
SDI3
L R
4
AES4
L R
CUE
3+4
Digital audio track/input
channel number
Audio input selection
Monitor selection
CUE track input
selection