Filter
Top Products
91
9-4 Items in the Extended Setup Menu
Chapter 9 Setup Menus
631 REC START MARK
MODE
Sub-item
1 CRASH REC OFF: Do not write recording start marks.
ON
: Write recording start marks during normal recording.
2 ASSEMBLE OFF: Do not write recording start marks.
ON
: Write recording start marks during assemble editing.
3 INSERT OFF
: Do not write recording start marks.
ON: Write recording start marks during insert editing.
635 LISTING TYPE
SELECT
Sub-item
1 REC START
MARK
OFF: Do not read recording start marks.
ON
: Read recording start marks.
2 SHOT MARK 1 OFF: Do not read shot mark 1.
ON: Read shot mark 1.
3 SHOT MARK 2 OFF: Do not read shot mark 2.
ON: Read shot mark 2.
4POST MARKOFF: Do not read post marks.
ON: Read post marks.
636 MARK SELECT IN
REC/ASSEMBLE
SHOT1
: Write shot mark 1 during recording and assemble editing.
SHOT2: Write shot mark 2 during recording and assemble editing.
POST: Write post marks during recording and assemble editing.
Menu items in the range 651 to 699, relating to the UMID
Item number Item name Settings
651 UMID OUTPUT Select the UMID type to be output.
off: Do not output UMID.
BASIC: Output Basic UMID.
EXTND: Output Extended UMID.
Note
Even if “EXTND” is selected, Basic UMID is output if Basic UMID is recorded on the
tape being played back.
653 UMID HD VANC
LINE
Specify the HDSDI signal VANC line into which the generated UMID should be inserted.
9, 572 14,577 19,582
10,573 15,578 20,583
11,574 16,579
12,575 17,580
13,576 18,581
Note
The output VANC line during playback follows the setting for recording.
Menu items in the range 600 to 650, relating to the timecode generator (Continued)
Item number Item name Settings