Filter
Top Products
74
9-2 Setup Menu Operations
Chapter 9 Setup Menus
9-2 Setup Menu
Operations
To display setup menus
Display function menu page P01: HOME, and select F9
(MENU).
The LCD enters character display mode and displays the
currently selected setup menu item.
For basic operations in the menu item, see page 63.
To display menus on the monitor
Connect the monitor to the COMPOSITE VIDEO
OUTPUT 3 (SUPER) connector, SDI OUTPUT 3
(SUPER) connector or HDSDI OUTPUT 3 (SUPER)
connector of this unit, and set F5 (CHARA) to “ON” in
function menu page P04: MISC-1. When a setup menu
appears on the monitor, a cursor indicates the currently
selected menu item.
To display a desired menu item
Display the setup menu in the menu display section and
turn the MULTI CONTROL knob.
You can jump to the first item of each menu item group by
selecting F3 (CATEG –) or F4 (CATEG +).
To display a desired sub-item
When the selected menu item contains sub-items, you can
select a desired sub-item as follows.
1
With the desired menu item selected, select F6
(SELECT).
The display changes to show the sub-item names.
2
Turn the MULTI CONTROL knob to select a desired
sub-item.
To chang menu item setting values
The procedure for changing menu item setting values
varies depending on whether the selected menu item has
sub-items or not.
To change the settings of menu items without
sub-items
After selecting a desired menu item using the procedure
described in the section “Displaying a desired menu item”
(see page 74), use the following procedure.
1
Select F6 (SELECT).
The current setting value of the selected menu item
appears.
2
Select F3 (–) or F4 (+), or turn the MULTI CONTROL
knob to select the desired setting value.
To select another menu item and change its setting
value
Select F5 (RETURN) to display the menu item list,
and repeat the procedure for selecting a menu item and
changing its setting value.
3
When all required changes have been made, select F9
(SET).
The new settings are confirmed.
To cancel changes and exit the setup menu
Select F10 (EXIT).
When F9 (SET) is not selected, all changes are
cancelled.
To change the settings of menu items with sub-
items
After selecting a desired sub-item using the procedure
described in the section “To displaying a desired sub-item”
on page 74, use the following procedure.
12 34
:
47 12
::
LTC
DF LTC EXT-LTC R-RUN
PROLL
HOME
L R
1
3+4
BANK3
REM:20min
PARARUN
HD
COND
VITC
L R
2
2
-60
-40
-30
-20
-10
0
dB
-60
-40
-30
-20
-10
0
dB
L R
3
1
L R
4
AES4
4
L R
CUE
3+4
-40
-20
-10
0
10
dB
EMPH DATA
59.94 SDI 2F ASM10801080
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
HOME
E.PRESET
VIDEO IN
SDI
EDIT
CLR CNT
MENU
TCG SET
SDI1 ANA2 SDI3
PB/EE
PB
CONFI
ENABLE
COUNTER
CTL
CONFI
Menu item (function)
SETUP
CATEG -
CATEG +
SETUP
SELECT
SET
EXIT
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
12 34
:
47 12
::
LTC
DF LTC
HOURS METER
HO1:OPE HOURS - 102
HO2:DRUM HOURS - 52
HD
COND
VITC
59.94 SDI 2F ASM1080
1080
Cursor indicating
the currently
selected item
Group name for the
currently selected item