Filter
Top Products
57
6-2 Shot Mark Operations
Chapter 6 Shot Mark Function
To select a shot mark
Turn the MULTI CONTROL knob to move the asterisk
cursor to the desired shot mark.
To write virtual shot marks
With the unit is stopped and F2 (REC/ERS) set to “OFF”,
hold down the SHIFT/ENTRY button and select F6
(MARK) during playback or searching.
A virtual shot mark appears on the monitor as “V-MARK
xxx” (xxx is the number). This is not written to the tape.
To add a memo mark (#)
Select the shot mark to which you want to add the memo
mark, and select F1 (MEMO).
Repeat this operation to remove a memo mark.
To select the types of shot mark to be read
in the list
For each types of shot mark (recording start mark, shot
mark 1, shot mark 2, and post mark), you can specify
whether it is read in.
In setup menu item 635 “LISTING TYPE SELECT”, set
the required types to “ON”.
For details of setup menu item 635, see Section “9-4 Items
in the Extended Setup Menu” (page 91).
With the following procedure, you can also specify
whether shot marks that have been read are displayed or
not.
1
With the shot mark list displayed, select F5
(SETTING).
You can now select the shot mark types.
The function menu display changes as follows.
2
Select F1 (PREV) or F2 (NEXT) to select a shot mark
type.
3
Select F4 (ON) or F3 (OFF) to set “ON” (displayed) or
“OFF” (not displayed).
4
To return to the shot mark list, select F10 (EXIT).
To delete a shot mark from the list
To delete an individual shot mark
Use the following procedure.
1
With the shot mark list displayed, turn the MULTI
CONTROL knob to select the shot mark to be deleted.
2
Select F6 (MARK).
While F6 is selected, an “X” (deletion target identifier)
appears after the selected shot mark number to be
deleted.
F2 (REC/ERS)
F6 (MARK)
SHIFT/ENTRY button
SHOT MRK
PREV
NEXT
OFF
ON
SHOT MRK
EXIT
(007/022)
NO. TIME CODE
SHOT MARKER
----------------------------
SHOT MARK 1 ON
*REC START MARK ON
SHOT MARK 2 OFF
005 SC 00:00:11:00
POST MARK ON
VIRTUAL MARK ON
STOP CODE OFF
1,2,33