Filter
Top Products
87
9-4 Items in the Extended Setup Menu
Chapter 9 Setup Menus
a) When controlled from an editor (BVE-2000/9100 etc.), selecting “REEL”
allows high-speed cueup.
403 AUTOMATIC PREROLL
REFERENCE ENTRY
Select whether the IN point is automatically set by pressing the PREROLL button,
when the IN point is not set on starting preroll.
DIS
: Do not set IN point automatically.
ENA: Set IN point automatically.
405 CUEUP BY CTL Select the tape transport mode when cuing. This setting is valid only when CTL/TC
is set to “CTL”.
CAP.: During cueup, the tape runs with “pinch ON” (maximum tape speed 10 times
normal).
REEL: During cueup, the tape runs with “pinch OFF”. As the tape approaches the
cue up point and the tape speed drops, the tape transport switches to the
“pinch ON” state.
a)
To give priority to editing accuracy, select “CAP.”.
Menu items in the range 400 to 499, relating to preroll (Continued)
Item number Item name Settings
Menu items in the range 500 to 599, relating to tape protection
Item number Item name Settings
501 STILL TIMER Select the time delay from when the tape stops (either the “stop mode” or the still
playback mode in search mode) until the unit automatically switches to the tape
protection mode, in order to protect the video heads and tape.
0.5S to 8M
to 30M: Set the value in the range 0.5 seconds to 30 minutes.
502 TAPE PROTECTION
MODE FROM SEARCH
Select the protection mode to protect the video heads and tape when in the still
playback mode in search mode (jog/shuttle).
STEP: Step forward at 1/30 times normal speed every 2 seconds.
STDBY: Switch to Standby OFF mode (the unit not on standby).
T.REL: Switch to tension release mode (the tape tension slackened).
503 TAPE PROTECTION
MODE FROM STOP
Select the operation of the protection mode to protect the video heads and tape
when stopped (the “stop mode”).
STDBY
: Switch to Standby OFF mode (the unit not on standby).
T.REL: Switch to tension release mode (the tape tension slackened).
STEP: Step forward at 1/30 times normal speed every 2 seconds.
504 DRUM ROTATION IN
STANDBY OFF
Select whether the drum rotates in Standby OFF mode.
OFF
: Drum does not rotate.
ON: Drum rotates.
505 STILL TENSION Select the tape tension state in the still playback mode.
NORML
: Normal tape tension is maintained during still playback mode, ready for
playback.
LOOSE: Reduce the tape tension further from the NORML setting. (Select
“LOOSE” when the unit is on standby for a long period of still playback, for
example, in a library management system (LMS).)
Note
When “LOOSE” is selected and the tape tension is reduced, playback cannot be
guaranteed.