Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\130ADJ.fm
master page=right
specdef20070130
RDR-HX750
3-210-862-41(1)
101
Settings and Adjustments
5 Press M/m to set the month, and press
,.
Set the day, year, hour, and minutes in
sequence. Press </, to select the item
to be set, then press M/m to set the
numbers. The day of the week is set
automatically.
To change the numbers, press < to
return to the item to be changed, and
press M/m.
6 Press ENTER to start the clock.
HELP Setting
Easy Setup (Resetting the Recorder)
Select this to run the “Easy Setup” program.
1 Select “Easy Setup” in “Basic,” and press
ENTER.
2 Select “Start,” and press ENTER.
3 Follow the instructions for “Easy Setup”
(page 24) from step 2.
Antenna Reception
Settings (Tuner)
The “Tuner” setup helps you to make tuner
and channel settings for the recorder.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “Initial Setup,” and press
ENTER.
3 Select “Tuner,” and press ENTER.
The “Tuner” setup appears with the
following options. The default settings
are underlined.
To turn off the display, press SYSTEM
MENU.
Automatically presets the receivable
channels. The recorder can receive VHF
channels 2 to 13, UHF channels 14 to 69, and
unscrambled CATV channels 1 to 125.
First, we recommend that you preset the
receivable channels in your area using Auto
Channel Setting.
1 Select “Auto Channel Setting” in
“Tuner,” and press ENTER.
2 Select “Antenna” or “Cable,” and press
ENTER.
“Antenna”(Default): Presets VHF and
UHF channels.
“Cable”: Presets cable TV channels.
The channel order will be set.
If any channels are unused or contain
unwanted channels, you can disable them
(page 102).
On Displays Help information for
GUI displays.
Off Does not set to HELP setting
mode.
Auto Channel Setting
,continued