Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\130ADJ.fm
master page=left
specdef20070130
RDR-HX750
3-210-862-41(1)
102
b Note
You cannot preset channels for the connected cable
box or satellite receiver.
Presets channels manually.
If some channels could not be set using the
“Easy Setup” function, you can set them
manually.
If there is no sound or if the picture is
distorted, the wrong tuner system may have
been preset during “Easy Setup.” Set the
correct tuner system manually in the steps
below.
1 Select “Manual CH Setting” in “Tuner,”
and press ENTER.
2 Select “Next Screen,” and press ENTER.
3 Press . PREV/NEXT > to select
the channel.
4 Select the item you want to change using
M/m, and change the settings using </
,, then press ENTER.
• To preset another channel, repeat from
step 4.
Skip
AFT
• If the Auto Fine Tuning function does not
work effectively, select “Off” and press m.
Press </, to obtain a clearer picture, and
press ENTER.
Manual CH Setting
On Select this when the channel is
unused or contains unwanted
channels.
The selected position will be
skipped when you press CH +/
–.
Off Does not skip the selected
channel.
Channel
On Turns on the Auto Fine Tuning
function.
Normally select this position.
Off Allows you to adjust the
picture manually.