Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\070VPL.fm
master page=right
specdef20070130
RDR-HX750
3-210-862-41(1)
53
Playback
To playback quickly with sound (Scan
Audio)
When you press M during playback, you
can play quickly with dialog or sound (except
for VIDEO CDs/Super VIDEO CDs).
No sound is output when you press M two
or more times to change search speed.
To display the registration code for this
recorder
Select “Registration Code” of “DivX” in the
“Options” setup (page 115).
To resume playback from the point where
you stopped (Resume Play)
When you press H PLAY again after you
stop playback, the recorder resumes playback
from the point where you pressed x STOP.
To start from the beginning, press x STOP
again, and press H PLAY. Playback starts
from the beginning of the title/track/scene.
The point where you stopped playing is
cleared when:
–you open the disc tray (except HDD).
–you play another title (except HDD).
–you start playback using the Title List
(except HDD).
–you edit the title after stopping playback.
–you change the settings on the recorder.
–you make a recording (except HDD/DVD-
RWs/DVD-Rs in VR mode).
–you disconnect the AC power cord.
b Note
Resume Play is not available for Super VIDEO
CDs.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the display for
entering your password appears on your TV
screen.
Enter your four-digit password using the
number buttons, and press ENTER.
The recorder starts playback.
To register or change the password, see
“Parental Control (DVD VIDEO only)” on
page 110.
To lock the recorder (Child Lock)
You can lock all of the buttons on the
recorder so that the settings are not canceled
by mistake.
When the recorder is turned off, hold down
x (stop) on the recorder until “LOCKED”
appears in the front panel display. The
recorder does not work except for timer
recordings while the Child Lock is set.
To unlock the recorder, hold down x (stop)
on the recorder until “UNLOCKED” appears
in the front panel display.
One-Touch Play (for HDMI connections
only)
Press H PLAY. With one touch of the
H PLAY button, the recorder and your TV
automatically turn on and the TV’s input is
switched to the recorder. Playback starts
automatically.
Set “HDMI Output” to “On” in the “HDMI
Control” setup (page 113) to use the One-
Touch Play function.
z Hint
You can also use the H PLAY button in step 3
(page 52) to start playback.
b Note
When using the HDMI connection, there may be a
delay, before the playback picture appears on the
TV screen, and the beginning portion of the
playback picture may not be displayed.
,continued