Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\060REC.fm
master page=right
specdef20070130
RDR-HX750
3-210-862-41(1)
49
Timer Recording
3 Select an option, and press ENTER.
“Modify”:
Changes the timer setting.
Select an item using </, and adjust
using M/m. Select “OK,” and press
ENTER.
“Erase”:
Erases the timer setting. Select “Yes,”
and press ENTER.
“Skip Once”:
Cancels the daily or weekly recordings
only once. After canceling the timer
setting, “Skip Once” appears next to the
timer setting in the Timer List.
To change or cancel the setting, repeat
steps 2 and 3 above.
When the timer settings overlap
• The program that starts first has priority and
the entire program is recorded.
• After finishing the previous recording, the
other recording starts with several tens-of-
second’s delay (when the end-time of one
recording and the start-time of another are
the same).
• When the recordings start at the same time,
only one of them will be recorded. Cancel
the timer setting for the program that you
are not going to record.
z Hints
• While recording, you can modify the timer setting
for the current recording.
• You can move to the first row/bottom row of the
Timer List using . PREV/NEXT > while
the list is displayed.
b Notes
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• Even if the timer is set for the same daily or
weekly program, the timer recording cannot be
made if it overlaps with a program that has
priority. “Overlap” will appear next to the
overlapped setting in the Timer List. Check the
priority order of the settings.