Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\110APL.fm
master page=right
specdef20070130
RDR-HX750
3-210-862-41(1)
81
Audio Tracks
You can play the contents of an album or disc
in the order you want by arranging the order
of the albums/tracks on a disc to create your
own program. You can make a program of up
to 24 steps.
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “Programme,” and press
ENTER.
3 Select “Input/Edit Programme,” and
press ENTER.
The “Input/Edit Programme” display
differs depending upon the disc type.
Example: DATA DVD
4 Select an album (example:
01.BRAHMS) using M/m, and press
,.
5 Select a track (example:
001.SYMPHONY01) using M/m, and
press ENTER.
The track is programed.
If you make a mistake, select the step
number (example: 01-001) using </M/
m, and press CLEAR.
6 To program other tracks, press </M/
m/, to select a step number, and
repeat steps 4 and 5.
7 Press H PLAY.
Programme play starts.
To cancel Programme play
Press CLEAR during playback. Or, set
“Programme” to “Cancel Programme Play”
in the “Play Mode” menu.
To erase the program
Press CLEAR in stop mode. Or, set
“Programme” to “Erase Programme List” in
the “Play Mode” menu.
z Hints
• The program you made remains after Programme
play finishes. To play the same program again, set
“Programme” to “Start Programme Play” in the
“Play Mode” menu. However, the program is
cleared after you remove the disc or press ?/1.
• You can repeat Programme play. Set “Repeat” to
“Repeat Programme” in the “Play Mode” menu
(page 80).
• You can select “Programme” from “Play Mode”
in the System Menu.
Creating your own program
(Programme)
DATA CD
DATA DVD
CD