Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\060REC.fm
master page=left
specdef20070130
RDR-HX750
3-210-862-41(1)
50
Recording from
Connected Equipment
You can set the recorder to automatically
record programs from connected equipment
that has a timer function (such as a satellite
receiver or cable box). Connect the
equipment to the LINE IN 1 jacks of the
recorder (page 29).
When the connected equipment turns on, the
recorder starts recording a program from the
LINE IN 1 jacks.
The recording destination is HDD only.
1 Press REC MODE repeatedly to select
the recording mode.
For details about recording mode, see
page 43.
2 Select the desired audio signal when
recording a Dual Mono program.
Set “External Audio” to “Dual Mono”
and “Dual Mono Recording” to “L” or
“R” in the “Audio In” setup (page 103).
3 Set the timer on the connected
equipment to the time of the program
you want to record, and turn it off.
4 Press down x REC STOP on the
recorder for more than 3 seconds.
The SYNCHRO REC indicator lights up
in the front panel display and the recorder
turns off. The recorder is ready to start
Synchro-Recording.
You can also set the recorder to stand by
for Synchro-Recording by setting
“Synchro Rec.” of “Timer Recording” to
“Yes” from the System Menu.
To cancel Synchro Rec before recording
starts
Press [/1.
The SYNCHRO REC indicator in the front
panel display turns off.
To cancel Synchro Rec during recording
Press down z REC for more than 3 seconds.
The Synchro Rec is canceled, and the
recording continues.
To stop recording
Press x REC STOP. Then select “Yes” in the
confirmation display, and press ENTER.
b Notes
• The recorder starts recording only after detecting
a video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder’s power
is on or off.
• The Synchro Rec function does not work with
some tuners. For details, see the tuner’s operating
instructions.
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function
(page 100) does not work.
• To use the Synchro Rec function, you must first
set the recorder’s clock correctly.
Recording from connected
equipment with a timer
(Synchro Rec.)
</M/m/,,
ENTER
INPUT
REC MODE
z REC
x REC
STOP
DVDHDD
[/1
HDD