Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\140ADD.fm
master page=left
specdef20070130
RDR-HX750
3-210-862-41(1)
118
No sound is output from the HDMI OUT
jack.
, Try the following: 1Turn the recorder off
and on again.
2Turn the connected
equipment off and on again.
3Disconnect
and then connect the HDMI cord again.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
, The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format. In this case, set “Audio
Output” to “PCM” in the “HDMI Output”
setup (page 113).
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the LINE OUT R-
AUDIO-L jacks (page 80).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“Audio DRC” in the “Audio Out” setup to
“On” (page 105).
An alternate audio track cannot be
recorded or played.
, Second Audio Program (SAP) is not
available for all programs. The program you
are recording does not have a second audio
program (page 44).
, When recording from connected
equipment, set “External Audio” to “Dual
Mono” in the “Audio In” setup (page 103).
, Multilingual tracks (main and sub) cannot
be recorded on the HDD (when Video
Mode On), DVD+RWs, DVD-RWs (Video
mode), DVD+Rs, or DVD-Rs (Video
mode) or if the recording mode is set in
PCM mode. To record both the main and
sub sounds on a disc, record on DVD-RWs/
DVD-Rs (VR mode). To record on the
HDD, set “HDD Recording Format” to
“Video Mode Off” in the “Recording” setup
(page 109).
, If you have connected an audio component
to the DIGITAL OUT (COAXIAL) jack
and want to change the audio track for the
HDD (when “HDD Recording Format” is
set to “Video Mode Off” in the “Recording”
setup (page 109))/DVD-RWs/DVD-Rs
(VR mode) during playback, set “Dolby
Digital Output” in the “Audio Out” setup to
“Dolby Digital -> PCM” (page 104).
The recorder does not play any type of disc
(except HDD).
, The disc is upside down. Insert the disc with
the labeled side facing up.
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder.
In this case, if the recorder is on, leave it on
(if it is off, leave it off) for about an hour
until the moisture evaporates.
, If the disc was recorded on another recorder
and was not finalized (page 39), the
recorder cannot play the disc.
The recorder does not start playback from
the beginning.
, Resume play was activated (page 53).
, You have inserted a DVD whose Title menu
or DVD menu automatically appears on the
TV screen when it is first inserted. Use the
menu to start playback.
The recorder starts playing automatically.
, The DVD VIDEO features an auto
playback function.
Playback stops automatically.
, If the DVD has an auto pause signal, the
recorder stops playback at the auto pause
signal.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
, Depending on the DVD, you may not be
able to do some of the operations above. See
the instruction manual supplied with the
disc.
Playback