Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\110APL.fm
master page=right
specdef20070130
RDR-HX750
3-210-862-41(1)
87
Audio Tracks
You can play the contents of the HDD or
connected USB device in the order you want
by arranging the order of the tracks on the
HDD or connected USB device to create your
own program. You can make a program of up
to 24 steps.
1 Press , while the Album List is
displayed.
2 Select “Play Mode,” using M/m, and
press ENTER.
The “Play Mode” menu appears.
3 Select “Programme,” and press
ENTER.
4 Select “Input/Edit Programme,” and
press ENTER.
5 Select an album (example: Album
001) using M/m, and press ,.
6 Select a track (example: Track 001)
using M/m, and press ENTER.
The track is programed.
If you make a mistake, select the step
number (example: 01.) using </M/m,
and press CLEAR.
7 To program other tracks, press </M/
m/, to select a step number, and
repeat steps 5 and 6.
8 Press H PLAY.
Programme play starts.
To cancel Programme play
Set “Programme” to “Cancel Programme
Play” in the “Play Mode” menu during
playback.
To erase the program
Set “Programme” to “Erase Programme List”
in the “Play Mode” menu.
z Hints
• You can select and play a track that is set to “Set
Skip.”
• The program you made remains after Programme
play finishes. To play the same program again, set
“Programme” to “Start Programme Play” in the
“Play Mode” menu. However, the program is
cleared after you press ?/1.
• You can repeat Programme play. Set “Repeat” to
“Repeat Programme” in the “Play Mode” menu
(page 86).
Creating your own program
(Programme)