Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\070VPL.fm
master page=right
specdef20070130
RDR-HX750
3-210-862-41(1)
57
Playback
* finalized disc only
You can play the contents of the HDD or a
disc in the order you want by arranging the
order of the titles/chapters/albums/tracks on
the HDD or disc to create your own program.
You can make a program of up to 24 steps.
1 Press PLAY MODE during playback.
The “Play Mode” menu appears.
2 Select “Programme,” and press
ENTER.
3 Select “Input/Edit Programme,” and
press ENTER.
The “Input/Edit Programme” display
differs depending upon the disc type.
Example: DVD
4 Select a title or album (example: Title
001) using M/m, and press ENTER.
5 Select a chapter or track (example:
Chapter 01) using M/m, and press
ENTER.
The chapter or track is programed.
If you make a mistake, select the step
number (example: 01.) using </M/m,
and press CLEAR.
6 To program other chapters or tracks,
press </M/m/, to select a step
number, and repeat steps 4 and 5.
7 Press H PLAY.
Programme play starts.
To cancel Programme play
Press CLEAR during playback. Or, set
“Programme” to “Cancel Programme Play”
in the “Play Mode” menu.
To erase the program
Press CLEAR in stop mode. Or, set
“Programme” to “Erase Programme List” in
the “Play Mode” menu.
z Hints
• The program you made remains after Programme
play finishes. To play the same program again, set
“Programme” to “Start Programme Play” in the
“Play Mode” menu. However, the program is
cleared after you remove the disc or press [/1.
• You can repeat Programme play. Set “Repeat” to
“Repeat Programme” in the “Play Mode” menu
(page 56).
• You can select “Programme” from “Play Mode”
in the System Menu.
* DivX video file only
You can adjust the picture quality from
connected equipment, such as a TV or
projector by selecting a preset setting. You
can also adjust the picture quality by
changing detailed settings, and store up to
three settings in the memory.
1 Press PICTURE ADJUST during
playback or in pause mode.
The “Picture Adjustment” menu appears.
2 Select a preset setting using </,,
and press ENTER.
Dynamic: produces a bold dynamic
picture by increasing the picture contrast
and the color intensity.
Standard: displays a standard picture.
Professional: displays an original picture.
Memory1/Memory2/Memory3: Your
own settings. To create your own
settings, see “To create your own setting”
below.
To check the detailed settings for the
selected preset, press DISPLAY.
Creating your own program
(Programme)
VCD
-
RW
Video
HDD
-
R
Video
*
*
Adjusting the picture quality
+
R
DVD
VCD
-
RWVR
-
RW
Video
+
RW
-
RVR
HDD
-
R
Video
DATA DVD
DATA CD
*
*
,continued