Filter
Top Products
C:\3210862411RDRHX750CA2\01GB-
RDRHX750CA2\040BAS.fm
master page=right
specdef20070130
RDR-HX750
3-210-862-41(1)
23
Hookups and Settings
Code numbers of controllable TVs
The remote performs the following:
If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder and
the supplied remote to one that differs from
the other Sony DVD recorder or player after
you have completed “Step 6: Easy Setup.”
The default command mode setting for this
recorder and the supplied remote is DVD3.
You can check the current Command Mode
in the front panel display. For details, see
page 114.
You can change channels of the recorder
using the number buttons.
Example: for channel 50
Press “5,” “0,” then press ENTER.
Manufacturer Code number
Sony 01 (default)
Hitachi 02
MGA/Mitsubishi 13
NEC 04
Panasonic 19
Philips 21
Pioneer 16
RCA 10
Samsung 20
Sharp 18
Toshiba 07
Buttons Operations
TV [/1 Turns your TV on or
off.
TV VOL
(volume) +/–
Adjusts the volume
of your TV.
TV CH +/– Selects the channel
on your TV.
TV INPUT (input
select)
Switches your TV’s
input source.
If you have a Sony DVD player
or more than one Sony DVD
recorder
The default command mode setting for this
recorder and the supplied remote is DVD3.
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
Changing channels of the
recorder using the remote
Number
buttons
ENTER