Filter
Top Products
Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-29
ST.TM.E10076.3
4.7.6 Advanced Menu
Overview
The Advanced Menu is selected from the System Menu by pressing the
Advanced softkey. This menu provides options for the advanced
parameters of the Encoder. See Figure 4.9 for the Advanced Menu
structure.
Setup Password Option
There is no password originally required to edit parameters so if one is
needed then it must be set. To access the Setup Password option, press
the Setup Password softkey in the Advanced Menu. The password can be
either on or off.
Current Password Option
To access the Current Password option, press the Current Password
softkey in the Advanced Menu. This allows the current password to be
changed.
NOTE…
For forgotten passwords, contact Customer Services.
Display Errors Option
To access the Display Errors option, press the Display Errors softkey in
the Advanced Menu. This displays or hides relevant error messages
according to whether the option is set On or Off.
System Control Option
To access the System Control option press the System Control softkey in
the Advanced Menu. This option enables the type of system control
specified in the SI to be set.
Table 4.20: System Control Options
Selected Option Description
MEM Control of the video/audio delay (lip sync) is via the MEM.
Local Control of the video/audio delay (lip sync) is within the
Encoder
2
.
External (SNMP) Control of the video/audio delay (lip sync) is via the SNMP
protocol.
If the control equipment is a TT7000 System Manager, ensure that the
Auto Lip Sync option is turned on (see Auto Lip Sync Option on
page 4-56). The TT7000 does not have a lip sync function therefore the
Encoder has to provide this.
2
To ensure correct lip sync when working with linear or pre-encoded audio, the option card M2/EOM2/AUDLIN should
be used.