Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-67
ST.TM.E10076.3
only shown if
M2/EOM2/DAT
option fitted
Data
Menu
Data A - RS232....
Data B - RS422....
Data X A - RS232....
Data X B - RS422....
Setup
Menu
Shaded options are showing status and
cannot be changed.
Data X B - RS422
Menu
Data B - RS422
Menu
Encoding
Bit-rate
RS422 PID
Test Mode
Delay
1
D Mode
1
SNMP oid index
Version
1
Data X A - RS232
Menu
Encoding
Baud Rate
RS232 PID
Hardware Release
Software Release
only shown if
M2/EOM2/DAT
option fitted
Encoding
Bit-rate
RS422 PID
Hardware Release
Software Release
Data A - RS232
Menu
Encoding
1
Baud-rate
1
RS232 PID
1
Delay
1
SNMP oid index
1
X = the number of the option slot.
1
Only available from Build Version 3.0.0 and later.
Figure 4.16: Menu Hierarchy – Setup/Data Menu
4.10.2 Data A - RS232 Menu (3.0 and later)
Encoding Option
To access the Encoding option, press the Encoding softkey in the
Data A - RS232 Menu. This enables the RS-232 asynchronous data
channel to be switched On or Off.
Baud Rate Option
To access the Baud Rate option, press the Baud Rate softkey in the
Data A - RS232 Menu. This enables the baud rate of the RS-232
asynchronous data channel to be set.